PIC32MZ Harmony 1.02 snmpv3_nvm_mpfs demo application with freeRTOS

I was able to get the snmpv3 demo application that ships with Microchip harmony version 1.02 working with FreeRTOS. It’s running but I don’t really have a good handle on tuning it to run most efficiently with task priorities, loop delays and such. I’m hoping someone was successful in getting this work also and could possibly share some pointers on this. Any help is greatly appreciated

PIC32MZ Harmony 1.02 snmpv3_nvm_mpfs demo application with freeRTOS

I don’t think anybody here was involved in creating the demo so will not know its structure. Unless you have some generic FreeRTOS type questions you might be better off asking on a Microchip forum. Regards.

PIC32MZ Harmony 1.02 snmpv3_nvm_mpfs demo application with freeRTOS

Thank you for the help, I did post the question on the Microchip forum and I didn’t get any responses. I’m sure as I start to get more involved with FreeRTOS, my questions will be more specific to that. From: Real Time Engineers ltd. Sent: Monday, February 09, 2015 12:50 PM To: [freertos:discussion] Subject: [freertos:discussion] PIC32MZ Harmony 1.02 snmpv3nvmmpfs demo application with freeRTOS I don’t think anybody here was involved in creating the demo so will not know its structure. Unless you have some generic FreeRTOS type questions you might be better off asking on a Microchip forum. Regards.
PIC32MZ Harmony 1.02 snmpv3nvmmpfs demo application with freeRTOShttps://sourceforge.net/p/freertos/discussion/382005/thread/837f41da/?limit=25#4ae9
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/freertos/discussion/382005/https://sourceforge.net/p/freertos/discussion/382005 To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/https://sourceforge.net/auth/subscriptions