FreeRTOS+Trace and FreeRTOS+CLI Demo – Error in UDP connection
Hi,
I have installed Tracelyzer yesterday and tried to follow the steps as mentioned in the following link –
https://www.freertos.org/FreeRTOS-Plus/FreeRTOSPlusTrace/FreeRTOSPlusTraceCLI_Example.shtml
I’m getting the following error (See attachment). Any clue to resolve this issue? I’m using Tracealyzer first-time.
Warning Message: “An existing connection was forcibly closed by the remote host”
I’m using Visual Studio 2017 compiler/simulator environment with FreeRTOSv10.2.0 library
FreeRTOS+Trace and FreeRTOS+CLI Demo – Error in UDP connection
I don’t think your issue is related to the Trace code. I’m not sure why
you would get that error if you are using UDP as UDP doesn’t have
connections – but I suspect it may be something to do with the security
(firewall or whatever) on your host computer.
FreeRTOS+Trace and FreeRTOS+CLI Demo – Error in UDP connection
Thanks Richard,
Yes, This issue is not related to the trace code.
Thanking for pointing it out about security firewall. I will look into this
Best Regards,
Sadashiva Kamath
On Thu, Feb 28, 2019 at 3:49 PM Richard Barry rtel@users.sourceforge.net
wrote:
I don’t think your issue is related to the Trace code. I’m not sure why you would get that error if you are using UDP as UDP doesn’t have connections – but I suspect it may be something to do with the security(firewall or whatever) on your host computer.
FreeRTOS+Trace and FreeRTOS+CLI Demo – Error in UDP connectionhttps://sourceforge.net/p/freertos/discussion/382005/thread/8933e3de8e/?limit=25#209a/4627
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/freertos/discussion/382005/ To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/