Device ID on PIC32 Stater Kit (screenshot)

Hi,
I bought the FreeRTOS Microchip PIC32 Education Kit from freeRTOS
http://shop.freertos.org/FreeRTOS_Evaluation_Kits_s/1514.htm But when I tried to run the demo, it pop up target device ID was not matching with the expected device ID. Hence, in the MPLAB IDE, I went Configuration -> Select Device. I found the preset device was wrong and I changed to the correct MCU, which was PIC32MX765F512L. But after changing, the IDE pop up the device was unloaded and then the IDE crashed. I took the screenshot of the whole story.
https://picasaweb.google.com/110916140868938330786/PIC32_wrong_device Are there anyone can help me with this? Thank you guys so much.

Device ID on PIC32 Stater Kit (screenshot)

Sorry to hear you are having a problem.  It sounds like the part number used on the kit has changed.  I will open one up and adjust the project accordingly, then post back here. Regards.

Device ID on PIC32 Stater Kit (screenshot)

I have looked at the kits I have open, from an older batch, and they definitely have the PIC32MX795F512 part on them.  Also, the cover of the kit box (current batch) shows a picture that has the PIC32MX795 partnumber written on its silk screen.  The Microchip site is also still showing the part as a PIC32MX795:
http://www.microchip.com/stellent/images/mchpsiteimages/PIC32%20USB%20Starter%20Kit%20II.gif It is possible that the latest batch have a different part, but before I take the cellophane off a new kit to see what is in side I would like to ask that you double check what is written on the chip – just in case you were mistaken.  I cannot see that there is a PIC32MX765F512L device listed.  Also, is the kit you have a USB Starter Kit II that you actually purchased through the FreeRTOS shop? Thanks.

Device ID on PIC32 Stater Kit (screenshot)

Richard, Thank you so much for your help. Sorry, It was my typo. The MCU is PIC32MX795F512L as the .gif you attached. I did try to choose the correct MCU, PIC32MX795F512L, in the MPLAB Configuration since the default MCU of the RTOSDemo.mcw was PIC32MX360F512L and this lead to the device mismatched. Please see my screenshot. But after I chose PIC32MX795F512L, the IDE crashed.
And I did purchase the USB Starter Kit II from the FreeRTOS shop. Thank you again for your help.

Device ID on PIC32 Stater Kit (screenshot)

Are you sure you are opening the right projects. The files that are sent with the education kit documents are set for the PIC32MX795F512L to target the USB-II starter kit hardware (I just checked), but the project that comes in the main FreeRTOS .zip file download targets the much older MX360 part on the Explorer16 PIM. Regards.

Device ID on PIC32 Stater Kit (screenshot)

To those who have the same question, Use the Demo code here for the FreeRTOS Microchip PIC32 Education Kit
http://www.freertos.org/Documentation/code Thanks for Richard’s help.

Device ID on PIC32 Stater Kit (screenshot)

The post that was here has been removed as it was to a private link for purchasers of the PIC32 book.  The link is in the preface to the book anyway. Regards.