Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


FreeRTOS+TCP network interface port layer requirement!

Posted by pgsaslam on August 31, 2016

We use Xilinx Zynq ZC702 platform with FreeRTOS+TCP for our applications. I have a requirement of upgrading the "Network Interface Port Layer" as defined in

to support two interfaces, one whereby packets are sent via ethernet interface of Xilinx Zynq ZC702 and other via our custom applications.

Is this possible by just modifying the Network interface port layer or other modifications are also required? Kindly clarify?

FreeRTOS+TCP network interface port layer requirement!

Posted by rtel on August 31, 2016

Without a deeper understanding of what it is you are trying to do it is difficult to say for sure. We do however have an experimental version of FreeRTOS+TCP that supports multiple interfaces (with different IP address, MAC addresses, etc.).

[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS v10.2.1 is available for immediate download. MIT licensed, includes 64-bit RISC-V, NXP Cortex-M33 demo, Nuvoton Cortex-M23 demo & STM32H745 dual core (AMP) demo.

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Cadence Tensilica Cortes

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers





STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner